Does stratux work with SkyDemon and FLARM?

Does stratux work with SkyDemon and FLARM?

Yes! We sell a European version of the unit with the FLARM image already installed and an 868 Mhz antenna instead of the 978 Mhz antenna for the US version. You can view them on Amazon UK and Amazon Germany.

You can find the latest FLARM images here (thank you Adrian).

Here's a YouTube video with instructions on using the Stratux with SkyDemon.

NOTE: The US version of the Stratux sold on Amazon.com will NOT WORK with FLARM because of the version 3 UAT hardware. You need the version 2 978 radio which is included on the listings above.

    • Related Articles

    • How do I enable FLARM with Skydemon?

      Go to Skydemon settings and enable the "GDL90 Compatible Device" option. You must be using a FLARM image. All units sold in Europe come pre-installed with this image.

    • How do I update my Stratux software?

      Current software version is 1.5b2 (alternate download link). You can check your version on the status screen by opening 192.168.10.1 (no www) on a web browser of a device connected to the stratux WiFi network. Software images are posted on stratux.me ...

    • Does Stratux work with Air Navigation Pro?

      Yes. Please follow the setup guide and you can also reference the discussion thread.

    • How do I enable Stratux developer mode?

      Many of the features most users don't need such as disabling sensors and enabling logging are hidden in the status screen of 192.168.10. If you want to tinker and disable radios or turn off AHRS and other advanced features you will need to enable ...

    • Stratux WiFi network not showing up after boot up

      If the Stratux unit boots up correctly with a solid red and green light but you can't find the "Stratux" WiFi network you should try the following steps: Disable and enable your WiFi toggle on your iPad or tablet Wait 2 minutes after boot up for the ...