Stratux WiFi network not showing up after boot up
If the Stratux unit boots up correctly with a solid red and green
light but you can't find the "Stratux" WiFi network you should try the
Disable and enable your WiFi toggle on your iPad or tablet
Wait 2 minutes after boot up for the network to appear
Reflash the microSD card
If you're unable to reflash the microSD card you may have a defective card. You can purchase a new one for $3 or contact us to get a replacement.
How do I update my Stratux software?
Current software version is 1.5b2 (alternate download link). You can check your version on the status screen by opening 192.168.10.1 (no www) on a web browser of a device connected to the stratux WiFi network. Software images are posted on stratux.me ...
How do I enable Stratux developer mode?
Many of the features most users don't need such as disabling sensors and enabling logging are hidden in the status screen of 192.168.10. If you want to tinker and disable radios or turn off AHRS and other advanced features you will need to enable ...
Red light only on boot up (no green or flashing green light). Unit won't start.
If the Stratux unit boots up with only a red light and no green or flashing green light you should reflash the microSD card. If you're unable to reflash the microSD card you may have a defective card. You can purchase a new one for $3 or contact us ...
Does stratux work with SkyDemon and FLARM?
Yes! We sell a European version of the unit with the FLARM image already installed and an 868 Mhz antenna instead of the 978 Mhz antenna for the US version. You can view them on Amazon UK and Amazon Germany. You can find the latest FLARM images here ...
Introduction video and basic operation
Video link for the short getting start guide explaining basic operation and tips. Plug the unit into the battery. On boot up you should get a red light indicating power and the fan will turn on momentarily to show you its working then stay off until ...