Why isn’t weather displaying?

Why isn’t weather displaying?

You need to enable the weather layer in your flight bag software. Stratux contains no map display software. ForeFlight instructions.

NOTE: Weather only shows up in air since line of sight with an ADS-B tower is needed. Usually around 1,000 AGL. Here is a map of tower locations in the US.

NOTE: You can see if your unit is receivin weather by accessing 192.168.10 from a browser of any device on the stratux network and looking at the status page under UAT statistics. Towers indicates the number of towers you’re connected to currently. The UAT bar under messages should be greater than 0 if you’re receiving weather data.

    • Related Articles

    • Is new ADS-B weather information such as icing, lightning, cloud tops supported?

      Yes. In June 2018, the FAA started broadcasting new weather products on ADS-B. This is supported on your unit without any additional upgrades, however, it's up to your electronic flight bag software to display the information being gathered by the ...
    • Avare setup guide

      Here's a video guide on setting up Avare. There's also a user forum with a dedicated Stratux section. Step by step guide from the forum: 1-In your Tablet / receiving device, make sure WiFi is ON. 2-Start your Stratux and wait until your device is ...
    • Introduction video and basic operation

      Video link for the short getting start guide explaining basic operation and tips. Plug the unit into the battery. On boot up you should get a red light indicating power and the fan will turn on momentarily to show you its working then stay off until ...