stratux
Does stratux work with SkyDemon and FLARM?
Yes! We sell a European version of the unit with the FLARM image already installed and an 868 Mhz antenna instead of the 978 Mhz antenna for the US version. You can view them on Amazon UK and Amazon Germany. You can find the latest FLARM images here ...
Can I use a RAM mount instead of the suction cups?
We are working on a RAM mount upgrade for the included mount but it's about 6 months from the production. In the meantime you can use the following modification to use the existing mount with a RAM base: The RAM base from Amazon with the diamond ball ...
ForeFlight traffic altitude displays in error
ForeFlight has a known software bug where they use pressure altitude information from the Stratux instead of GPS altitude causing reported altitudes of traffic to be off by thousands of feet. You can force ForeFlight to use GPS altitude by disabled ...
Does Stratux work with Air Navigation Pro?
Yes. Please follow the setup guide and you can also reference the discussion thread.
Is new ADS-B weather information such as icing, lightning, cloud tops supported?
Yes. In June 2018, the FAA started broadcasting new weather products on ADS-B. This is supported on your unit without any additional upgrades, however, it's up to your electronic flight bag software to display the information being gathered by the ...
Battery instruction manuals
EasyAcc manual. PocketJuice manual.
Avare setup guide
Here's a video guide on setting up Avare. There's also a user forum with a dedicated Stratux section. Step by step guide from the forum: 1-In your Tablet / receiving device, make sure WiFi is ON. 2-Start your Stratux and wait until your device is ...
How do I enable FLARM with Skydemon?
Go to Skydemon settings and enable the "GDL90 Compatible Device" option. You must be using a FLARM image. All units sold in Europe come pre-installed with this image.
Where can I find the latest version of the Stratux software?
The latest firmware version is v1.6r1-eu026. You can view the latest version and change log on Github.
How do I enable Stratux developer mode?
Many of the features most users don't need such as disabling sensors and enabling logging are hidden in the status screen of 192.168.10. If you want to tinker and disable radios or turn off AHRS and other advanced features you will need to enable ...
Why can't I see distant traffic in ForeFlight?
ForeFlight only displays traffic in a 3,500' bubble around your aircraft. From their Mobile Pilot Guide: "The Hide Distant Traffic setting, shown when your iPad or iPhone is connected to an ADS-B receiver, is accessed via the “Gear” button on the ...
How do I stop traffic alerts from my own aircraft?
Easiest way to solve it is to go to the traffic page on 192.168.10.1 while flying and finding the aircraft that is at your altitude and 0.1 miles away. It'll give you the hex code. Put that into the hex field replacing your planes transponder source ...
GPS troubleshooting
The GPS chip is located inside the unit on the same side as the fan. It needs a clear sky view for operation. Sometimes the USB connection can get knocked loose. Here is a video with basic troubleshooting tips. You can view the GPS fix status by ...
How do I use the rubberized strap?
Follow the video guide for instructions on usage. The strap holds the unit to the battery. Extra straps with bumpers are available for purchase on Amazon.
How can I tighten loose antenna ports?
Use the included wrench set and follow the video guide.
How can I add AHRS to my Stratux build?
Follow the video instructions for the AHRS upgrade. You can purchase all the components on Amazon with the AHRS upgrade kit.
What’s the HDMI and audio port for?
It’s part of the Raspberry Pi3 board used to build the Stratux. It’s not needed unless you want to hook your unit up to a display monitor (Linux knowledge required) or repurpose it for another project.
Is there a way to install an on/off switch for shutdown?
If you'd like to save yourself the trouble of unplugging the power cord each time you power down the unit you can buy a $5 USB on/off cable from Amazon.
Samsung tablet troubleshooting
If you're having issues with getting your Stratux to work on a Samsung or any other Android based tablet make sure you disable power saving modes. There may be at least two ways to address this issue if it applies to you: 1. *Turn OFF Power Saving ...
Can I power direct from the plane?
Yes. But you need 2 amps of greater and beware of low quality power cables and power spikes. Video guide here. Tested power equipment list: 4 hour battery 6 hour battery 12 hour battery Aircraft power adapter (must be 2 amps or greater) USB cable
Replacement parts list
Suction cups Antennas USB power switch Rubberized strap SD card (need 2 GB or greater) SD with Stratux image Window suction mount 4 hour battery 6 hour battery 12 hour battery Aircraft power adapter (must be 2 amps or greater) USB cable
How long does the included battery last?
Typically 4 hours. But you have other options for longer flights. Purchase a larger battery or power direct from the plane. Tested power equipment list:4 hour battery 6 hour battery 12 hour battery Aircraft power adapter (must be 2 amps or greater) ...
How do I update my Stratux software?
Current software version is 1.5b2 (alternate download link). You can check your version on the status screen by opening 192.168.10.1 (no www) on a web browser of a device connected to the stratux WiFi network. Software images are posted on stratux.me ...
Why isn’t weather displaying?
You need to enable the weather layer in your flight bag software. Stratux contains no map display software. ForeFlight instructions. NOTE: Weather only shows up in air since line of sight with an ADS-B tower is needed. Usually around 1,000 AGL. Here ...
What tablet should I use?
Most users enjoy the compact size of an iPad mini which you can purchase for around $350. There's also a refurbished model available for $250. If you're looking for a larger display the iPad Air is a better bet for $450. Samsung tablets are also ...
Stratux WiFi network not showing up after boot up
If the Stratux unit boots up correctly with a solid red and green light but you can't find the "Stratux" WiFi network you should try the following steps: Disable and enable your WiFi toggle on your iPad or tablet Wait 2 minutes after boot up for the ...
Red light only on boot up (no green or flashing green light). Unit won't start.
If the Stratux unit boots up with only a red light and no green or flashing green light you should reflash the microSD card. If you're unable to reflash the microSD card you may have a defective card. You can purchase a new one for $3 or contact us ...
Introduction video and basic operation
Video link for the short getting start guide explaining basic operation and tips. Plug the unit into the battery. On boot up you should get a red light indicating power and the fan will turn on momentarily to show you its working then stay off until ...