How do I enable Stratux developer mode?

How do I enable Stratux developer mode?

Many of the features most users don't need such as disabling sensors and enabling logging are hidden in the status screen of 192.168.10. If you want to tinker and disable radios or turn off AHRS and other advanced features you will need to enable developer mode. 

CAUTION: playing with settings in developer mode such as logging may cause your firmware not to work and you will need to reflash.


To enable developer mode:
  1. Connect to the 192.168.10.1 status page using a web browser of a device on the stratux WiFi network
  2. Tap the blue version number at the top of the status screen about 7 times quickly to enable developer mode
  3. You will now see a yellow "developer mode" at the top of your status screen

    • Related Articles

    • Stratux WiFi network not showing up after boot up

      If the Stratux unit boots up correctly with a solid red and green light but you can't find the "Stratux" WiFi network you should try the following steps: Disable and enable your WiFi toggle on your iPad or tablet Wait 2 minutes after boot up for the ...

    • How do I enable FLARM with Skydemon?

      Go to Skydemon settings and enable the "GDL90 Compatible Device" option. You must be using a FLARM image. All units sold in Europe come pre-installed with this image.

    • Does stratux work with SkyDemon and FLARM?

      Yes! We sell a European version of the unit with the FLARM image already installed and an 868 Mhz antenna instead of the 978 Mhz antenna for the US version. You can view them on Amazon UK and Amazon Germany. You can find the latest FLARM images here ...

    • ForeFlight traffic altitude displays in error

      ForeFlight has a known software bug where they use pressure altitude information from the Stratux instead of GPS altitude causing reported altitudes of traffic to be off by thousands of feet. You can force ForeFlight to use GPS altitude by disabled ...

    • How do I update my Stratux software?

      Current software version is 1.5b2 (alternate download link). You can check your version on the status screen by opening 192.168.10.1 (no www) on a web browser of a device connected to the stratux WiFi network. Software images are posted on stratux.me ...