How do I enable FLARM with Skydemon?

How do I enable FLARM with Skydemon?

Go to Skydemon settings and enable the "GDL90 Compatible Device" option. You must be using a FLARM image. All units sold in Europe come pre-installed with this image.

    • Related Articles

    • Does stratux work with SkyDemon and FLARM?

      Yes! We sell a European version of the unit with the FLARM image already installed and an 868 Mhz antenna instead of the 978 Mhz antenna for the US version. You can view them on Amazon UK and Amazon Germany. You can find the latest FLARM images here ...

    • How do I enable Stratux developer mode?

      Many of the features most users don't need such as disabling sensors and enabling logging are hidden in the status screen of 192.168.10. If you want to tinker and disable radios or turn off AHRS and other advanced features you will need to enable ...

    • Stratux WiFi network not showing up after boot up

      If the Stratux unit boots up correctly with a solid red and green light but you can't find the "Stratux" WiFi network you should try the following steps: Disable and enable your WiFi toggle on your iPad or tablet Wait 2 minutes after boot up for the ...

    • Why isn’t weather displaying?

      You need to enable the weather layer in your flight bag software. Stratux contains no map display software. ForeFlight instructions. NOTE: Weather only shows up in air since line of sight with an ADS-B tower is needed. Usually around 1,000 AGL. Here ...

    • ForeFlight traffic altitude displays in error

      ForeFlight has a known software bug where they use pressure altitude information from the Stratux instead of GPS altitude causing reported altitudes of traffic to be off by thousands of feet. You can force ForeFlight to use GPS altitude by disabled ...